Checking the toner quantity and total output count, Toner remaining(%), About the toner indicator – Sharp AR-M208 User Manual
Page 94
92
GE
NE
R
A
L INFORMATION
CHECKING THE TONER QUANTITY
AND TOTAL OUTPUT COUNT
The approximate quantity of toner remaining and the total output count can be displayed by the
procedure below. The total count value displayed is the output count in the copy, print, and fax modes
including the output count by the self-print function of the printer and facsimile features.
1
Press and hold the COPY key during standby or warm-up.
●
The toner quantity and the total output count will be displayed in the display while the key
is pressed.
NOTE:
An 11" x 17" or A3 sheet is counted as two sheets. A two-sided copy is also counted as two
sheets.
About the toner indicator
The amount of toner remaining is indicated in 5 levels. Use this indicator as a guideline for replacement
of the toner cartridge.
Refer to the table below for the relation between the indicator level and the amount of toner remaining.
●
When the toner level falls below 25%, obtain a replacement toner cartridge as soon as possible.
●
For more information, consult your dealer.
NOTE:
●
The amount of toner used will vary depending on conditions of machine usage and the content
of the documents printed. Use the above toner levels as a general guideline.
Toner level indicator
Amount of toner remaining (approximate)
100% to 90%
90% to 75%
75% to 50%
50% to 25%
Less than 25%
Obtain a replacement toner cartridge as soon
as possible.
TOTAL OUTPUT
26,788
TONER REMAINING(%)
0
25
50
75
100
TONER REMAINING(%)
0
25
50
75
100
TONER REMAINING(%)
0
25
50
75
100
TONER REMAINING(%)
0
25
50
75
100
TONER REMAINING(%)
0
25
50
75
100
TONER REMAINING(%)
0
25
50
75
100
Ar-M208_sec.book 92 ページ ２００２年６月１３日 木曜日 午後２時３７分