Sony SX-215 - Manual (Page 60)

User’s Guide
SH SERVI FILters
Shows filter settings
sample output:
# Service Name Filter
1 SLX_FFFFFF 0: No Filter
2 BINARY_P1 0: No Filter
3 TEXT_P1 1: Text Substitution m= LF, r=
CRLF
4 SLXFFFFFF_P1_4 0: No Filter
5 SLXFFFFFF_P1_5 0: No Filter
6 SLXFFFFFF_P1_AT 4: PostScript Tagged Binary
SET SERVI <service name> FMS
Set filter 1 (text replacement filter) match string index. If the index is zero, the default string of <LF> (line feed) is
used.
SET SERVI <service name> FRM nn
(default = 0 )
SET SERVI <service name> FRS
Set filter 1 (text replacement filter) replace string index. If the index is zero, the default string of <CRLF> (carriage
return-line feed) is used.
SET SERVI <service name> FRS nn
(default = 0 )
SET SERVI <service name> IP
Enable or disable all IP based jobs (lpd, raw tcp, ftp, etc.) on the service.
SET SERVI <service name> IP [ENable | DIsable]
(default = enabled for service 1 and 2, disabled for all others)
SET SERVI <service name> NAme
Change the service name
SET SERVI <service name> NAme <newname>
(default varies by service)
SET SERVI <service name> POrt
Set the output port associated with a service.
SET SERVI <service name> POrt <portname>
(default = “S1”)
Document #40181-420 Rev. B 60