Spectra Watermakers BlueScale Vision 956YH60001 - Manual (Page 34)

Data - Network Screen
Network
Obtain an IP
Address
Automatically If selected, the Network Camera will obtain its IP address and related information from a DHCP Server.
Only select this option if your LAN has a DHCP Server.
Use the following IP
Address If selected, you must assign the following data to the Network Camera.
• IP Address - Enter an unused IP address from the address range used on your LAN.
• Subnet Mask - Use the same value as PCs on your LAN.
• Default Gateway - Use the same value as PCs on your LAN.
Obtain DNS server
address
automatically If selected, the Network Camera will use the DNS address or addresses provided by the DHPC server.
This option is only available if the IP address setting is Obtain an IP address Automatically.
Use the following
DNS server address Primary DNS server - Use the same value as PCs on your LAN. Normally, your ISP will provide this
address.
Secondary DNS server - This is optional. If entered, this DNS will be used if the Primary DNS does not
respond.
Secondary Port This sets the port number for HTTP (Web) connections to the Camera, whether for administration or
viewing video.
If enabled, you can connect using either port 80 or the Secondary port. You must enter the Secondary port
number (between 1024 to 65535) in the field provided.
Note that when using a port number which is not 80, you must specify the port number in the URL. For
example, if the Camera's IP address was 192.168.1.100 and the Secondary port was 1024, you would
specify the URL for the Camera as follows:
http://192.168.1.100:1024
RTP/RTSP The RTSP (Real Time Streaming Protocol), a standard for connected client(s) to control streaming data
(MPEG-4) over the World Wide Web. Enter the RTSP Port number (between 1024 and 65535) in the field
provided. The default RTSP Port is 554.
The RTP (Real Time Transport Protocol), an Internet protocol for transmitting real-time data such as audio
and video.
Max RTP Data Packet field will let users limit the size of the file. Enter the desired value between 400 and
1400.
Multicast RTP/RTSP
Enable Multicast Enable the feature as required.
Video Address Enter the address of video.
Video Port Enter the desired value (between 1024 to 65534) in the field provided. The number you entered must be
even values.
Audio Address Enter the address of the audio.
Audio Port Enter the desired value (between 1024 to 65534) in the field provided. The number you entered must be
even values.
Time to Live Enter the desired length of time, if the packets fail to be delivered to their destination within. The Time to
Live you entered must be in-between 1 to 255.
30