Spectra Watermakers BlueScale Vision 956YH60001 - Manual (Page 63)

Move Control. Use this to move the camera to the desired position. There may a short delay after clicking the
desired icon. You should wait a couple of seconds rather than click again.
Channel Indicator. This indicates the current channel (camera).
Play. Use this to re-start viewing, after using the Stop or Pause button.
Pause. Use this to temporarily stop the connection to the camera
Stop. This will terminate the connection to the camera, halting both the viewing and the recording (if in progress).
Record. Click this to start recording the current video stream.
While recording, this button will be blue. To stop recording, click the Stop button.
Snapshot. Click this to take a single JPEG "snapshot" image of the current video.
Zoom Camera. A digital zoom feature is available. To zoom in on a section of the window, click this icon. Then
use your mouse to select the section you want to magnify. Click the icon again to disable the zoom feature.
Flip Video. Click this to have the image swapped top-to-bottom.
Mirror Video. Click this to have the image swapped left-to-right.
Direct Pan/Tilt. Use this to move the camera to the Pan/Tilt position directly.
Sound On/Off. This can be used to select the Audio stream which can be heard. (Only one audio stream can be
selected at any time.) If the camera does not support audio, or if audio is disabled on the camera, this option is
unavailable.
Microphone On/Off. For Cameras that feature audio, click this to enable the microphone.
Volume. If Sound/Microphone is enabled, you can right click the icon(s), then drag and drop to raise or lower the
volume.
Screen Layout. Use this to select the number of Channels (Cameras) to be displayed on screen. Up to 9 cameras
can be displayed.
59