Spectra Watermakers BlueScale Vision 956YH60001 - Manual (Page 44)

Pan/Tilt Screen
This screen is displayed when the Pan/Tilt option on the Video & Audio menu is clicked.
Figure 31: Pan/Tilt Screen
Data - Pan/Tilt Screen
Pan/Tilt
Enable Pan/Tilt
Control Enable the checkbox in order to use the Pan/Tilt function.
Preset Point
Position Click this button to define the preset point position.
Set Patrol Sequence
Set Patrol Sequence This feature determines how the camera will move when it is set to "Rotate". You can set a number of
Preset Positions; the camera will go to the first position, then move through the list of present positions until
it is finished. The camera will stop at the last position in the list.
To create the Preset Sequence, select the desired Preset Position in the left column, and click the "Add >>"
button. Repeat until the desired sequence is complete. Note that you can add the same Preset Position more
than once; this can be used to make the camera stay longer at one position.
To delete a position from the Sequence, select the desired position and click the "Remove" button.
Time This determines how long the camera will stay at each position while executing the sequence. Set this to the
desired value.
40