Spectra Watermakers BlueScale Vision 956YH60001 - Manual (Page 60)

Camera Data - LAN
Local ID This is the name you gave to this camera. This field must be entered.
Camera Name This is the default name for the Network Camera, and cannot be changed.
IP Address The current IP address of the Network Camera.
Port Number This will normally display "80". Only change this if requested to do so by the Network Camera
Administrator.
Login The camera Administrator can require that users provide a username and password before being
allowed to view the live video.
• If the Administrator has not enabled this option, the Login fields can be left blank.
• Otherwise, you must enter the username and password allocated to your by Administrator.
Setup Camera Pages Click this button to connect the Web-based interface of the Camera
Enable Trigger Event Check this if you want the Camera to have the feature enabled.
You can add the same Camera twice, once for the LAN (using
the LAN IP address), and again for the Internet (using the
Internet IP address). This will allow viewing the camera whether
you are on the same LAN as the camera or in a remote location.
56