Spectra Watermakers BlueScale Vision 956YH60001 - Manual (Page 6)

• Viewing/Recording Utility.
A user-friendly Windows utility is provided for viewing live video. For periods when you are
absent, or for scheduled recording, this application also allows you to record video to an ASF file on your PC. The recorded files
are in a standard Windows Media format, and thus usable by a wide variety of programs if required. Up to 5 users can view the
live video simultaneously by using the provided utility.
•
Motion Detection. This feature can detect motion in the field of view. The Network Camera will compare consecutive frames
to detect changes caused by the movement of large objects. This function only works indoors due to the sensitivity of the CMOS
sensor. When motion is detection, an E-mail alert can be sent, or some other action may be triggered.
•
Flexible Scheduling. You can limit access to the video stream to specified times using a flexible scheduling system. The
Motion Detection feature can also have its own schedule, so it is active only when required.
•
Syslog Support. If you have a Syslog Server, the Network Camera can send its log data to your Syslog Server.
•
Audio Support. You can listen as well as look! Audio is encoded with the video if desired. You can use either the built-in
microphone or an external speaker.
Internet Features
•
User-definable HTTP port number . This allows Internet Gateways to use "port mapping" so the Network Camera and a Web
Server can share the same Internet IP address.
•
DDNS Support. In order to view video over the Internet, users must know the Internet IP address of the gateway used by the
Network Camera. But if the Gateway has a dynamic IP address, DDNS (Dynamic DNS) is required. Since many existing
Gateways do not support DDNS, this function is incorporated into the Network Camera.
• NTP (Network-Time-Protocol) Support. NTP allows the Network Camera to calibrate its internal clock from an Internet
Time-Server. This ensures that the time stamp on Video from the Network Camera will be correct.
Security Features
•
User Authentication. If desired, access to live video can be restricted to known users. Users will have to enter their username
and password before being able to view the video stream. Up to 20 users can be entered in the user database.
•
Password-Protected Configuration . Configuration data can be password protected, so that it only can be changed by the
Network Camera Administrator.
Wireless Features (Wireless Model Only)
•
Standards Compliant. The Network Camera complies with the IEEE802.11g (DSSS) specifications for Wireless LANs.
•
Supports both 802.11b and 802.11g Standards. The Network Camera supports both 802.11b and 802.11g standards.
•
Speeds to 54Mbps. All speeds up to the 802.11g maximum of 54Mbps are supported.
•
Wired and Wireless Network Support. The Network Camera supports either wired or wireless transmission.
•
WEP Support . Full WEP support (64/128 Bit) on the Wireless interface is provided.
•
WPA/WPA2 Support . The WPA Personal/WPA2 Personal standard is also supported, allowing advanced encryption of
wireless data.
•
WPS Support. The Network Camera supports WPS (Wi-Fi Protected Setup) PBC (Push Button Configuration) mode and Pin
Code mode (numeric code). It makes the security feature easier to configure.
2