Spectra Watermakers BlueScale Vision 956YH60001 - Manual (Page 40)

Data - Video & Audion Screen
MPEG-4 Settings
Resolution Select the desired video resolution format. The default resolution is set to 320*240.
Video Quality
Control
• Constant Bit Rate: Select the desired bit rate. The default is set to 1.2 Mbps.
• Fixed Quality: Select the desired option. The default fix quality is set to Normal.
Max. Frame Rate Select the desired Maximum bandwidth for the video stream. Note that you can specify EITHER the
Bandwidth OR the Frame Rate, not both. If the Bandwidth is defined, the frame rate will be adjusted as
necessary to achieve the specified frame rate.
The default value for bandwidth is Unlimited, which allows you to specify the desired frame rate.
MJPEG Settings
Resolution Select the desired video resolution format. The default resolution is set to 320*240.
Fixed Video
Quality Select the desired fix quality. The default fix quality is set to Normal.
Max. Frame Rate Select the desired Maximum bandwidth for the video stream. Note that you can specify EITHER the
Bandwidth OR the Frame Rate, not both. If the Bandwidth is defined, the frame rate will be adjusted as
necessary to achieve the specified frame rate.
The default values for bandwidth is Unlimited, which allows you to specify the desired frame rate.
Mobil Settings
Enable Mobil
Streaming Enable streaming video for the mobile device by checking this checkbox.
Resolution The default resolution is set to 160x120.
Video Quality
Control
• Constant Bit Rate: Select the desired fix bit rate.
• Fixed Quality: Select the desired option. The default fix quality is set to Normal.
Max. Frame Rate Select the desired Maximum bandwidth for the video stream.
Access Code Enter the code for accessing the live video from camera through cell phone connection.
Video Adjustments
Power Line
Frequency Select the power line frequency (50Hz or 60Hz) used in your region, to improve the picture quality under
florescent lighting.
White Balance Select the desired option to match the current environment and lighting.
Brightness If necessary, you can adjust the brightness to obtain a better image. For example, if the camera is facing a
bright light, the image may be too dark. In this case, you can increase the brightness.
Sharpness Select the desired option for the sharpness. You can select a Sharpness value between -3 and 3.
Options
Microphone Enable audio by checking this checkbox. Using Audio will increase the bandwidth requirements slightly.
Audio Type Select the desired audio type.
Speaker Enable speaker sound by checking this checkbox.
Time Stamp If enabled, the current time will be displayed on the Video image.
Text Display Enable this setting if you want text to be displayed on the Video image, and enter the desired text - up to 20
characters. This feature is often used to identify each camera when multiple cameras are installed.
36