Sanyo PLC WTC500L - Manual (Page 22)

22
Connecting for Audio Signal
Cables used for connection
• Audio Cable (Mini Plug [stereo] x 2)
• Audio Cable (RCA x 2)
(Cables are not supplied with the projector.)
External Audio Equipment
Audio cable
(stereo)
Audio Input
Audio Output
AUDIO OUT
(stereo)
Audio cable
(RCA)
AUDIO IN
Unplug the power cords of both the projector
and external equipment from the AC outlet
before connecting cables.
✔ Notes:
• When the AUDIO OUT is plugged-in, the projector’s built-
in speaker is not available.
• When the Standby mode is set to “Eco“ in the Setting,
MONITOR OUT and AUDIO OUT are disabled. (p.56)
Installation
Audio cable
(stereo)
Selected
Input
MONITOR OUT
Terminal
AUDIO OUT
Terminal
Input 1 Input 1(D-Sub) Input 1
Input 2 Input 2(5-BNC) Input 2
Input 3 Input 1 or Input 2* Input 3
Network Input 1 or Input 2* NIL
MONITOR OUT and AUDIO OUT Specifications
* Between Input1 and Input2, the last selected
Input is output to MONITOR OUT terminal.