Projector condition, Indicators, Appendix – Sanyo PLC WTC500L User Manual

Page 79

Advertising
background image

79

The projector is detecting abnormal condition .

Indicators

Projector Condition

POWER

green / red

WARNING

TEMP.

red

WARNING

FILTER

orange

SHUTTER

blue

LAMP 1/2

REP.

yellow

If the Filter counter reached a time set in the timer

setting, a Filter replacement icon (Fig.2) appears on the

screen and the WARNING FILTER indicator on the top

panel lights up. Replace the filter as soon as possible. If

the filter is out of scroll and the projector reaches a time

set in the timer setting, Fig. 3 appears on the screen

and the WARNING FILTER indicator lights up. Replace

the filter cartridge as soon as possible.

If the filter is clogged and no scroll is left in the filter

cartridge, a Filter cartridge replacement icon (Fig.4)

appears on the screen and the WARNING FILTER

indicator lights up. Replace the filter cartridge as soon as

possible.

Note:

• Fig.2, Fig.3 and Fig.4 icon will not appear when the Display

function is set to “Off” (p.56), or during “Freeze” (p.30).

The filter cartridge is not installed in the projector. Check

the filter compartment to see if the filter cartridge is

installed in the projector.

The projector detects an abnormal condition during filter

scroll.

The projection is being cooled down after detecting an

abnormal condition during filter scroll.

The projector has been cooled down enough and is in

the stand-by mode after detecting an abnormal condition

during filter scroll

The projector detects an abnormal condition and cannot

be turned on. Unplug the AC power cord and plug it

again to turn on the projector. If the projector is turned

off again, unplug the AC power cord and contact the

dealer or the service center. Do not leave the projector

on. It may cause an electric shock or a fire hazard.

The shutter is out of control.

The shutter is out of control. (The projector is in the

cooling mode.)

The shutter is out of control. (The projector is in the

stand-by mode.) In that case, contact the service station

immediately.

Fig .2 Filter replacement icon

Fig .4 Filter cartridge replacement icon

Fig .3

red

red

red

red

green

Appendix

Advertising