Operating with remote control, Basic operation – Sanyo PLC WTC500L User Manual
Page 30
30
Remote Control
Operating with Remote Control
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
FREEZE button
Press the AUTO PC button on the remote control to operate
the Auto PC Adj. function. The computer screen adjustment
can be done easily by pressing this button. See page 38 for
details.
AUTO PC button
Press the D.ZOOM button on the remote control to enter to
the Digital zoom +/– mode. See page 47 for details.
D .ZOOM button
D .ZOOM
button
INFO . button
POINT
ed
buttons
FREEZE button
AUTO PC
button
Press the SCREEN button on the remote control to select
the desired screen size. The selected screen size symbol
appears on the screen for 4 seconds. See pages 45–48 for
details.
SCREEN button
SCREEN button
Press the ZOOM button on the remote control to zoom in
and out the image.
Use the Point
ed
buttons to zoom in
and out the images.
ZOOM button
ZOOM
button
Information display can be used to confirm the current
operating condition of the projector and the signal being
projected through the projector.
Press the INFO. button on the remote control to display the
information window on the screen. To hide the information
window, press the INFO. button again or Point
7 8
buttons.
The information window can also be selected from the
menu.
INFO . button
Press the FOCUS button on the remote control to adjust
focus of the image. Use the Point
ed
buttons to focus in
and out the images.
FOCUS button
FOCUS
button
LENS SHIFT
button
See page 28 for details.
LENS SHIFT button
✔
Note:
• See the next page for the description
of other buttons.
Basic Operation
Information Menu
Information Menu
* The H- and V-sync freq. values described in this figure
may be different from the actual values.