Sanyo PLC WTC500L - Manual (Page 62)

62
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock, lamp counter, and
filter counter to the factory default settings.
Exit the Setting Menu.
Quit
Select Factory default and this
box appears. Select [Yes], and
the next box appears.
Select [Yes] to
activate it.
Factory default
Setting
Filter counter
This function is used to set a time for the filter replacement.
Use the Point ed buttons to move the red frame pointer to Filter
counter and then press the SELECT button. A dialog box appears
showing the Used time option and the Scrolls remaining option.
Used Time . . . . . . Show the total accumulated time of the
filter use, timer setting option and the Reset
options. When the projector reaches a time
set in the timer setting, the Filter replacement
icon (Fig. 1) appears on the screen and the
total accumulated time turns red, indicating
that the filter replacement is necessary. If
the filter is out of scroll and the projector
reaches a time set in the timer setting, Fig.
2 appears on the screen, indicating that the
filter cartridge replacement is necessary.
Scrolls remaining . . Show the scroll counter and the Reset
options. When the filter scroll is counted
down to 1 (Scroll counter on the screen is
showing “0 scroll(s)” , the last scroll icon
(Fig. 3) appears on the screen. When the
filter scroll is counted down to 0, the Filter
cartridge replacement icon (Fig. 4) appears
on the screen and the WARNING FILTER
indicator lights orange, indicating that the
filter cartridge replacement is necessary.
To set a timer, press the SELECT button on Used time option.
Move the red arrow pointer to the timer setting option and use
the Point 7 8 buttons to select from (Off/ 400H/700H/1000H)
depending on the use environment.
When replacing the Filter cartridge, reset the Filter counter and the
Scroll counter (p.65).
Filter replacement icon appears on the screen
at a set time.
Fig .1 Filter replacement icon
Filter cartridge replacement icon appears on
the screen when the filter scroll is counted
down to 0 scroll.
Fig .4 Filter cartridge replacement icon
Set the red frame pointer to the item
and press the SELECT button .
Last scroll icon appears on the screen when
the filter is down to the last scroll.
Fig .3 Last scroll icon
Use the Point 7 8 buttons
to set the timer. Select from
(Off/ 400H/700H/1000H)
depending on the use
environment
Fig .2
✔ Note:
• Do not reset the Filter counter and the Scroll counter without
replacing the Filter cartridge. Be sure to reset the Filter counter
and the Scroll counter only after replacing the Filter cartridge.
• Timer setting notifies that the filter needs replacement. To
replace the filter, use the filter control function (p.54).
✔ Note:
• Fig.1, Fig. 2, Fig. 3 or Fig. 4 will appear at turning
on and selecting input source.
• Fig.1, Fig. 2, Fig. 3 or Fig. 4 will not appear when
the Display function is set to “Off” (p.54), or during
“Freeze” (p.30).