Sony BRC-Z700 - Manual (Page 13)

Ov
er
v
ie
w
System Configuration
13
Operating a BRC-Z700 Camera from a Long Distance
This system allows you:
• To operate the camera remotely from a distance up to 1,000 m (3,281 feet)
• To perform pan/tilt and zoom operations using the joystick
• To transmit the video signal and control signal of the camera to a distant place using the Optical Fiber Cable
System configuration
Notes
• Be sure to turn on the power of the BRC-Z700 camera before you turn on the power of the BRU-H700 HD Optical
Multiplex Unit.
• The BRC-Z700 camera does not operate if nothing is connected to the BRBK-MF1 HD Optical Multiplex Card
inserted into the camera. To operate the camera, connect the BRU-H700 Optical Multiplex Unit to the BRBK-MF1
using the CCFC-M100HG Optical Fiber Cable and turn on the power of the BRU-H700.
• When the BRBK-MF1 HD Optical Multiplex Card is inserted into the BRC-Z700 camera, the EXT SYNC IN
connector, VISCA RS-232C IN/OUT connectors and VISCA RS-422 connector on the rear of the camera and the
BOTTOM switches on the bottom of the camera are disabled. Use the connectors and switches on the rear of the BRU-
H700 Optical Multiplex Unit instead.
• The optional CCFC-M100 Optical Fiber Cable cannot be used with this system.
,
BRC-Z700
BRBK-MF1 HD Optical Multiplex Card
CCFC-M100HG Optical Fiber Cable
RM-BR300 Remote Control Unit
HD video monitor, VTR, etc.
BRU-H700
Optical Multiplex
Unit
Video signal
Remote control (VISCA) signal
Signal flow