Sony BRC-Z700 - Manual (Page 32)

Ad
jus
ting an
d
S
e
tti
ng Wit
h
Men
u
s
COLOR Menu
32
For the 59.94i signal format
1/60, 1/90, 1/100, 1/125, 1/180, 1/250, 1/350,
1/500, 1/725, 1/1000, 1/1500, 1/2000, 1/3000,
1/4000, 1/6000, 1/10000
For the 50i signal format
1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300,
1/425, 1/600, 1/1000, 1/1250, 1/1750, 1/2500,
1/3500, 1/6000, 1/10000
IRIS: Select the iris from among the following:
CLOSE, F16, F15, F14, F12, F11, F10, F9.6, F8.7,
F8.0, F7.3, F6.8, F6.2, F5.6, F5.2, F4.8, F4.4, F4.0,
F3.7, F3.4, F3.1, F2.8, F2.6, F2.4, F2.2, F2.0, F1.8,
F1.7, F1.6
EX-COMP (exposure compensation)
When MODE is set this item to FULL AUTO,
SHUTTER Pri, IRIS Pri or GAIN Pri, set this item to
ON to enable exposure compensation.
When you set EX-COMP to ON, LEVEL appears and
you can select the exposure compensation level from
among the following:
–7, –6, –5, –4, –3, –2, –1, 0, +1, +2, +3, +4, +5, +6, +7
If you set the level to 0, exposure compensation will be
disabled. Level +7 is the brightest and –7 is the darkest
compensation values.
When EX-COMP is set to OFF, exposure compensation
does not function.
BACK LIGHT
Setting the item to ON enables the BACK LIGHT
function. Setting it to OFF disables the function.
SPOT LIGHT
The SPOT LIGHT function allows exposure adjustment
at darker levels if a portion of the object to be shot is
illuminated.
Setting the item to ON enables the SPOT LIGHT
function. Setting it to OFF disables the function.
Note
You cannot use both the BACK LIGHT and SPOT
LIGHT functions at the same time.
COLOR Menu
The COLOR menu is used to adjust the white balance
and the color.
WHITE BALANCE (white balance mode)
Select the white balance mode from among the
following:
AUTO1, AUTO2, INDOOR, OUTDOOR, ONE PUSH,
MANUAL
AUTO1: Adjusts the white balance automatically while
leaving natural colors.
AUTO2: Adjusts the white balance automatically.
INDOOR: The R.GAIN and B.GAIN values are fixed
to those for a color temperature of 3200K.
OUTDOOR: The R.GAIN and B.GAIN values are
fixed to those for a color temperature of 5800K.
ONE PUSH: The white balance adjustment is activated
when you zoom in on a white subject in the center
of the screen and press the HOME button on the
supplied Remote Commander, or press the button
on the top of the joystick or the ONE PUSH AWB
button on the RM-BR300 Remote Control Unit.
MANUAL: Adjusts the white balance manually.
When you select any mode of WHITE BALANCE,
some of the following setting items that are required for
the selected mode appear.
WB SENS: You can adjust the speed with which the
color of an object is put close to white balance
focusing point in AUTO1 or AUTO2 mode. Set to
HIGH to do so at higher speed and to LOW to do so
at lower speed.
You can also adjust the red or blue tint when
shooting an object under reddish light sources such
as an incandescent light and candle, or under bluish
light sources such as the shade. Selecting HIGH
decreases red or blue tint, and selecting LOW
increases red or blue tint.
WB R.SHIFT, WB B.SHIFT: You can shift the white
balance focusing point in automatic white balance
mode to your favorite red tint (WB R.SHIFT) or
blue tint (WB B.SHIFT) individually. The
adjustable range of each item is from –7 to +7.
<COLOR>
>WHITE BALANCE
WB SENS
WB R.SHIFT
WB B.SHIFT
COLOR GAIN
COLOR MATRIX
R.ENHANCE
G.ENHANCE
B.ENHANCE
AUTO1
MID
0
0
0
0N PAGE1
0
0
0