Sony BRC-Z700 - Manual (Page 34)

Ad
jus
ting an
d
S
e
tti
ng Wit
h
Men
u
s
FOCUS Menu
34
GAMMA
Select the gamma curb of the camera.
NORMAL: The object is shot using normal gamma
curb.
CINEMA: The object is shot using a gamma curb to
reproduce a film-like picture with a natural tone.
FLICKER CANCEL
When this item is set to ON, picture blurs (flicker) can
be reduced even when shooting under a 50Hz
fluorescent light. Set it to OFF to disable this feature.
Note
The FLICKER CANCEL feature may have no effect
depending on the type of light source.
STEADY SHOT
You can select the effects of picture blur compensation.
OFF: Disables the picture blur compensation depending
on shooting conditions.
SOFT: Sets picture blur compensation with the
exception of natural blur.
STANDARD: Sets normal picture blur compensation.
HARD: Sets maximum picture blur compensation.
Notes
• This feature does not function while the camera is
panning or tilting.
• It may take some time to obtain stable images after
turning on the camera when STEADY SHOT is
activated.
B&W (black and white mode)
When this item is set to ON, an image is shot in black
and white.
COLOR BAR
When this item is set to ON, the built-in color bar of the
camera is displayed on the monitor screen.
FOCUS Menu
The FOCUS menu is used to select the focus mode.
MODE (focus mode)
Select the focus adjustment mode.
AUTO: The focus is adjusted automatically.
MANUAL: Adjust the focus manually. Use the FAR/
NEAR buttons on the supplied Remote
Commander to adjust the focus.
Note
Set MODE to MANUAL when you shoot
• a flat subject with low contrast such as a white wall.
• a subject through glass.
• a lateral-striped subject.
• a subject exposed to strong light with an illumination,
reflecting light, etc.
• a subject in a dark background with flashing lights
such as a night view.
NEAR LIMIT
Focusing on a subject located near the camera is limited.
ON: A subject closer to the camera than about 50 cm
(19
3
/
4
inches) is not focused.
OFF: Regardless of the distance from the camera, a
subject is focused.
AF ASSIST (auto focus assist)
You can temporarily adjust the focus manually even
when MODE is set to AUTO.
ON: You can adjust to focus another subject in a forward
or backward location with the NEAR/FAR buttons
on the supplied Remote Commander or the FOCUS
control on the optional RM-BR300 Remote Control
Unit.
OFF: The focus of the subject is adjusted automatically.
Manual focus adjustment is deactivated.
Note
The AF ASSIST feature is available only when MODE
is set to AUTO.
<FOCUS>
>MODE
NEAR LIMIT
AF ASSIST
AUTO
ON
OFF