Sony BRC-Z700 - Manual (Page 58)

In
s
ta
llat
ion
a
nd
Conne
c
tio
ns
Installation
58
Installation on a shelf, etc. in a high
position (example)
1
Remove the four screws on the bottom of the
camera to remove the four feet.
2
Attach the ceiling bracket (A) to the bottom of the
camera using the supplied four screws (3M3 × 8).
Position the a hole for screwing on the ceiling
bracket (A) to the front of the camera as illustrated,
align the screw holes on the ceiling bracket with
those on the bottom of the camera, then attach the
bracket to the camera.
Note
For attaching the camera to the ceiling bracket, use
only the supplied screws. Using other screws may
damage the camera.
3
Attach the supplied wire rope to the ceiling bracket
(A).
Pass the wire rope through the fixing hole and
attach its end to the attachment hole on the bracket
using the supplied one screw (3M4 × 8).
3M3 × 8 (supplied)
Ceiling
bracket (A)
Front of
camera
For attaching the wire rope to the bracket, use
only the supplied screw. Using another screw may
disable the function of the wire rope.
3M4 × 8 (supplied)
Wire rope (supplied)
Ceiling
bracket (A)
Fixing hole for wire rope
Caution