Sony BRC-Z700 - Manual (Page 26)

Ov
er
v
ie
w
Location and Function of Parts
26
HFBK-SD1 SD Interface Board (not
supplied) (available with the BRU-
H700 only)
A MONITOR connector (D-sub 9-pin)
Supplies various analog signals such as composite
video, S video, component video and RGB signals.
The output signal can be selected in the DOWN
CONVERTER menu of the camera.
B DIP switches (inside the cap)
When this Interface Board is inserted into the BRU-
H700 HD Optical Multiplex Unit, the DIP switches
cannot be used.
C VIDEO connector (BNC type)
Supplies analog composite signals. The aspect ratio
can be selected in the DOWN CONVERTER menu
of the camera.
D SD-SDI connector (BNC type)
Supplies down-converted SD-SDI signals that
conform to SMPTE259M (for 59.94i signal format)
or ITU-R BT.656 (for 50i signal format) serial
digital interface standards. The aspect ratio can be
selected with the DOWN CONVERTER menu of
the camera.
HFBK-HD1 HD Interface Board (not
supplied) (available with the BRU-
H700 only)
A MONITOR connector (D-sub 15-pin)
Supplies analog video signals (component or
RGB). The output signal can be selected in the HD-
SDI menu of the camera.
B DIP switches (inside the cap)
When this Interface Board is inserted into the BRU-
H700 HD Optical Multiplex Unit, the DIP switches
cannot be used.
C HD-SDI connector (BNC type)
Supplies HD-SDI signals that conform to the
SMPTE292M serial digital interface standards. The
two connectors output the same signal.
HFBK-XG1 XGA Interface Board
(not supplied) (available with the
BRU-H700 only)
A MONITOR connector (D-sub 15-pin)
Supplies video signals after conversion to VGA,
XGA or WXGA. The standards of output signal
and aspect ratio can be specified in the PC-
OUTPUT menu.
B DIP switches (inside the cap)
When this Interface Board is inserted into the BRU-
H700 HD Optical Multiplex Unit, the DIP switches
cannot be used.
HFBK-TS1 HDV Interface Board
(not supplied) (available with the
BRU-H700 only)
A AUDIO L/R jacks (phono type)
Input audio signals (stereo).
The input audio signals are converted into signals
that comply with HDV standards.
B DIP switches (inside the cap)
When this Interface Board is inserted into the BRU-
H700 HD Optical Multiplex Unit, the DIP switches
cannot be used.
MONITOR
HFBK-SD1
VIDEO SD-SDI
1 2 3 4
MONITOR
HFBK-HD1
HD-SDI HD-SDI
1 2 3
MONITOR
HFBK-XG1
1 2
AUDIO
HFBK-TS1
L R i.LINK (HDV) OUT
3 2 1