Samsung SF-370 Series - Manual (Page 39)

6.2
Inserting a pause
With some private telephone systems, you must dial an access code (9, for example) and listen for a second dial
tone before dialling an outside number. In such cases, you need to insert a pause in the number when you are
registering Auto Dial such as a One-Touch or Speed Dial number.
If you are asked for the number when setting up Auto Dial, follow this procedure:
Press Redial/Pause to insert a pause while entering the number.
• A ‘P’ is inserted at the point where you pressed Redial/Pause . If you need a longer pause, press Redial/Pause as
many times you want.
Using Caller ID
The Caller ID system enables the receiver to view the numbers or names of callers. Once you have subscribed to
Caller ID services, your machine can display caller information. To switch the Caller ID feature on:
1 Press Menu repeatedly until SETUP SYSTEM appears, and press OK .
2 Select Caller ID by pressing Left/right arrow buttons, and press OK .
3 Choose the desired option, and press OK .
• On : Activates the Caller ID feature.
• On /w Junk Fax : Activates Caller ID and ignores any fax registered as a junk fax (see "Registering/deleting the junk fax
numbers" on page 6.5).
• Off : Deactivates the Caller ID feature.
N OTE : It depends on the country whether Caller ID system is supported or not.
Using the Mute
While talking on the phone via speaker phone or handset, you many want to mute your voice for secret.
To mute a call
Press Mute while speaking.
• The display shows MUTE to indicate it is activated.
To release the mute
Press Mute to resume conversation.