Lcd error messages – Samsung SF-370 Series User Manual

Page 64

Advertising
background image

C

AR

E

AND

M

AI

N

T

ENA

N

C

E

8.7

C

AR

E

AND

M

AI

NTENANCE

C

AR

E

AN

D

M

AI

NT

ENA

N

CE

C

ARE

AND

M

AINTE

N

A

N

CE

C

ARE

AND

M

AI

NTENA

N

CE

C

AR

E

AN

D

M

AI

NT

ENA

N

C

E

C

AR

E

AN

D

M

AI

NT

ENA

N

CE

C

AR

E

AN

D

M

AI

NT

ENA

N

CE

LCD error messages

Display

Status/Solution

Related to:

Adjust scanner first in Maintenance
menu

The shading waveform to be used as a reference is corrupted due
to unknown reason. Adjust the scanner to fix this problem as
described in "Shading adjustment" on page 8.4.

Scanner

Check white paper document and try
again

The scanning level is too low to compare with reference level.
To adjust shading, you should use the plain and white paper.

Scanner

CID: No Number

The detected Caller ID has no information about phone number. Fax/Telephone

CID: Number Error

The parity or checksum error was occurred in detected Caller
ID.

Fax/Telephone

CID: Private

The detected Caller ID is defined as Private.

Fax/Telephone

Clean white roller, glass and try again

The scanning level is slightly low, which can affect the image
quality. To clean concerned parts, see "Cleaning the document
scanner" on page 8.2.

Scanner

Connect Tel Line

The machine automatically checks a telephone line status during
powering up whether it is correctly connected or not.

Fax/Telephone

Duplicated with [Speed No.xx]
The ‘xx’ indicates the location
number.

The same number has already been registered into another speed
dial location.

Telephone

Exceeded Job Memory

The machine can hold 3

My Favorites

but you tried to add more. Fax

Exceeded Job Memory
Cancel scheduled job and try again

The broadcasting and delayed fax can hold 5 jobs in total.
Cancel scheduled job and try again.

Fax

Exceeded Total
Message Memory

The machine can hold up to 200 messages which include
Greetings, ICM (InComing Messages) and recorded
conversations.
Erase old messages to make a room in the memory.

TAM
(SF-375TP only)

ICM Memory Full

The voice memory is full. No more caller’s ICM (InComing
Messages) can be recorded (Total recording time is about
30 minutes).

TAM
(SF-375TP only)

Ink Low. Install new ink cartridge

The print cartridge has run out of ink. To install a new Print
Cartridge, see "Replacing the print cartridge" on page 8.3.
Although this message is displayed, you can make a copy or
print a report. But, stored data in memory can be printed by
changing the cartridge.

Cartridge

Install ink cartridge

Print cartridge is not installed or improperly installed.

Cartridge

Invalid Time

The time you set for fax forwarding is wrong.

Fax

Job Not Assigned

You attempted to cancel the scheduled job but there is no jobs
scheduled. You attempted to delete or print send the My
Favorites document when there is no document stored.

Fax

Junk Fax Empty

You attempted to delete the junk fax number when there is no
junk fax number.

Fax

Junk Fax Full

The machine can hold 20 junk fax numbers but you tried to add
more.

Fax

Load Document

You have tried to send a fax and there is no document loaded
into the machine.

Document

Load paper and press ok

You have tried to do any job and there is no paper loaded into the
machine.

Paper

Advertising