Samsung SF-370 Series - Manual (Page 47)

6.10
When you have entered System Setup, now you can see one of the options in the display by selecting Left/right
arrow buttons. The right column shows the suboptions belonging to the options.
Option Suboption
Ink Save Used for less ink consumption. It toggles On and Off.
Silent Mode Used when you want to turn off all sounds made by the machine.
Language The LCD Language setting determines the language of the text that appears on the control panel display
and information printing.
Sending Confirm A confirmation report shows whether the transmission was successful or not, how many pages were
sent, etc. Choose
ON to print a confirmation report automatically each time you send a fax. Choose OFF
not to print whatever the result is. Choose ERROR to print only when an error occurs, and the
transmission was unsuccessful. Note that a confirmation report of a memory transmission includes the
Image TCR (Transmission Confirmation Report) which shows the image of the first page with the
various information depending on the value you made as described in "Image TCR" on page 6.11.
Paper Size Select the paper size you will use for fax receive, and copying.
Auto Reduction When receiving a document as long as or longer than the paper loaded, the machine can reduce the data
to fit your paper. If the fax machine cannot fit the data into one page with the feature enabled, the data is
divided and printed in actual size on two or more sheets.
Discard Size If you turn the Automatic Reduction feature off, you can set the fax machine to discard any excess
image at the bottom of the page when receiving a document as long as or longer than the paper loaded in
your machine. If the incoming fax is out of the margin you have set, it will be printed on two sheets of
paper. Enter the desired
Discard Size in millimeter.
Rings To Answer You can select the number of rings before answering an incoming call. If you are using your machine as
both a telephone and a fax machine, we suggest you set the ring count to at least 4 to give you time to
answer.
ECM Mode a This mode compensates for poor line quality and ensures accurate, error- free transmission with any
other ECM-equipped facsimile machine. If the line quality is poor, transmission time may be increased
when ECM is enabled.
Send From Memory This determines how to transmit the document manually. If it is on, the machine will scan documents
into memory and then send a fax. If it is off, the machine will first dial and send.
Caller ID
b,d You can see the number of the person calling you. Before using the Caller ID feature, Caller ID service
must be installed on your telephone line by the telephone company. For more information, see "Using
Caller ID" on page 6.2.
Short Message
b,d You can use the short message service. Before using the Short Message service, it must be installed on
your telephone line by the telephone company. For more information, see "Using Short Message
Service (SMS)" on page 6.6.
Set Junk Fax No. You can prohibit your machine from uncertified or unwanted junk faxes like spam mail. To add a
number as a junk fax you should have at least one Caller ID detected by the machine. Even though you
have added junk fax numbers, if you turned off the Caller ID option above, the Junk Fax protection will
be removed. For more information, see "Registering/deleting the junk fax numbers" on page 6.5.
Auto Journal A journal report shows the specific information concerning transmission or reception activities, the time
and date of most recent 40 transmissions or receptions.
DRPD Mode
c DRPD (Distinctive ring) is a service provided by some telephone companies that assigns two phone
numbers to one phone line, each of which makes your phone ring differently. If you subscribe to this
service, you can program your machine to learn one phone number and distinctive ring for incoming
faxes.
As the display shows, call this fax from other fax machine. The machine will learn the ring pattern and
displays
DRPD OK when finished. Now, you can use the Rcv.Mode/Darkness to select DRPD receiving
mode.
Remote Test This lets the service center check the status of your machine to find out if there is anything wrong.
Resolution Sets the default resolution when copying and faxing.