Samsung SF-370 Series - Manual (Page 51)

7.2
Making Connection
Connect the USB cable which came with your machine.
• The “New Hardware found” message is shown, click the “cancel” button.
Installing Printer Software
This printer supports only black print.
You must install software using the supplied Printer Software CD after you have set up your machine and
connected it to your computer.
System Requirements
Verify the following:
• At least 128 MB (Windows 2000), 256 MB (Windows XP), 1024 MB (Windows Vista) or more of RAM is installed on
your PC.
• There is at least 300 MB or free disk space on your PC.
• All applications are closed on your PC before beginning installation.
• You are using Windows 2000, Windows XP or Windows Vista.
• You are using at least Internet Explorer 5.0.
Installing Printer Software
For Windows 2000/XP/Vista users, cancel the “New Hardware Found” screen when the computer boots up.
Make sure that your machine is plugged in and connected to your computer’s USB port before installing
Printer Software from the Printer Software CD.
1 Insert the supplied Printer Software CD into your CD-ROM drive.
• The Printer Software CD should automatically run and the opening window appear.
• If the installation window does not appear, click Start, and then Run. Type X:setup.exe, replacing “X” with the letter
which represents your drive and click OK.
• If you use Windows Vista, click Start > All Programs >Accessories > Run, and type X:\Setup.exe.
• If the AutoPlay window appears in Windows Vista, click Run.
• Setup.exe in Install or run program field, and click Continue in the User Account Control window.
2 Click Next.
• If necessary, select a language from the drop-down list.