Sierra INNOVA-MASS 241-VTP - Manual (Page 41)

Chapter 3 Operation Series 24-HP Instruction Manual
3-2 IM-24-HP
Setup
Menus
Password
Mass Flow
Rate
Volume
Flow Rate
Temperature
Pressure
Density
Total
Alarm 1
Status
Fluid
ENTER
Date & Time
Alarm 2
Status
Alarm 3
Status
Run Mode
Screens
Energy
*
ENTER
Press Exit to return
to Run Mode
Use
keys to access
each item
Start-Up
To begin flow meter operation:
1. Verify the flow meter is installed and wired as described in Chapter
2.
2. Apply power to the meter. At start up, the unit runs a series of self-
tests that check the RAM, ROM, EPROM and all flow sensing com-
ponents. After completing the self-test sequence, the Run Mode
screens appear
.
3. The Run Mode displays flow information as determined by system
settings. Press the ×Ø arrow keys to view the Run Mode screens.
4. Press the ENTER key from any Run Mode screen to access the Setup
Menus. Use the Setup Menus to configure the meter’s multi-
parameter features to fit your application.
Note
Starting the flow meter
or pressing EXIT will
always display the Run
Mode screens.