Sim2 Multimedia DIGITAL D60 - Manual (Page 32)

32 Using the projector
Displaying more than one image source simultaneously
Your projector is capable of displaying pictures simultaneously from two input sources, which
can be used to enhance your presentation in an interesting way. Ensure the signals you want
to display are correctly connected to the projector.
To display the PIP window:
• Using the remote control
Press PIP to display the PIP page and make adjustments by
following the steps starting from step 3 in the section "Using the
OSD menu" below.
When the PIP window is on, to change the PIP window size, press
SIZE repeatedly until a desired size is selected.
When the PIP window is on, to change the PIP window position,
press POSITION repeatedly until a desired position is selected.
When the PIP window is on, to highlight one of the sources to
make adjustments, press ACTIVE repeatedly until the source is
selected.
• Using the OSD menu
1. Press MENU and then press / until the Display menu is
highlighted.
2. Press to highlight PIP and press ENTER. The PIP page
displays.
3. Highlight PIP and press / to select On.
The projector will select two currently active signals to display
and the last viewed picture will be displayed on the big screen
as a main source.
The PIP function is effective at below source combination.
4. To change the Main Source or Second Source, press to
highlight Main Source or Second Source and press ENTER.
The source selection bar displays.
5. Use / to highlight the source you want to display for the
main (bigger) or second (smaller) window, and press ENTER
to save the setting and go back to the PIP page.
6. To make OSD settings to one of the two sources (main or second), highlight Active
Window and press / to select the source you want to make adjustments.
The settings made on the OSD menus will only take effect on the active window. See "Disabled functions
for the active windows" on page 33 for exceptions.
7. To change the position of the smaller picture, highlight Position and press /
repeatedly until a suitable position is selected.
8. To resize the small picture, highlight Size and press / to set the PIP size among Small
or Large.
9. To save the settings and leave the OSD menu, press MENU once or EXIT repeatedly until
the menu disappears.
Source 2
Source 1 CVBS S-Video
HDMI 1 V V
HDMI 2 V V
Component 1 V V
Component 2 V V
RGB HD V V
PIP
PIP
Main Source
Second Source
Active Window
Position
Size
On
Main
Top-Right
Large
EXIT Back
ENTER
Aspect Ratio
Keystone
Position
Overscan Adjustment
PIP
PC & Component YPbPr Tuning
EXIT Back
0
S-Video
Anamorphic
Display Color System