Lamp information, Getting to know the lamp hour, Extending lamp life – Sim2 Multimedia DIGITAL D60 User Manual

Page 43: Getting to know the lamp hour extending lamp life, For det, Getting to know the lamp, About lamp reset rate, Setting lamp power as whisper, Setting auto off

Advertising
background image

43

Additional information

Lamp information

Getting to know the lamp hour

When the projector is in operation, the duration (in hours) of

lamp usage is automatically calculated by the built-in timer. The
method of calculating the equivalent lamp hour is as follows:
Equivalent lamp hour
= 1 (hours used in Whisper mode) + 3/2 (hours used in Normal

mode)

See

"Setting Lamp Power as Whisper"

below for more information on

Whisper mode.

To obtain the lamp hour information:
1.

Press MENU and then press / until the Setup menu is

highlighted.

2.

Press

to

highlight

Lamp settings and press ENTER. The

Lamp settings page displays.

3.

Highlight Lamp Hours and press ENTER to display the Lamp
Hours
information page.

4.

To leave the menu, press MENU.

About Lamp Reset Rate:

Lamp Reset Rate shows the percentage of the lamp rest life. The
method of calculating the rate is as follows:
Reset Rate = [1 - (Total Lamp Hours /3000)] x 100%

Extending lamp life

The projection lamp is a consumable item that normally can last

up to 2500-3000 hours with proper usage. To keep the lamp life
as long as possible, you can do the following settings via the OSD

menu.

Setting Lamp Power as Whisper

Using Whisper mode reduces system noise and power

consumption. If the Whisper mode is selected, the light output
will be reduced and result in darker projected pictures.
Setting the projector in Whisper mode also extends the lamp life. To set Whisper mode, go
into the Setup > Lamp settings > Lamp Power menu and press / .

Setting Auto Off

This function allows the projector to turn off automatically if no input source is detected after
a set period of time.
To set Auto Off, go into the System > Auto Off menu and press / to select a time period.

The time period can be set from 5 to 30 minutes in 5-minute increments. If the preset time
lengths are not suitable for your presentation, select Disable. The projector will not

automatically shut down in a certain time period.

Lamp settings

Pattern

High Altitude Mode
Password
Reset All Settings

EXIT Back

S-Video

ENTER

Off

Lamp settings

Lamp Power
Lamp Hours

ENTER

EXIT Back

Lamp Hours

Lamp Hours Nor.
Lamp Hours Eco.
Lamp Reset Rate

EXIT Back

100hr
150hr

90%

Whisper

Dust Filter

Setup

Information

System

Language
Splash Screen
My Screen
Projector Position

Auto Off

Sleep Timer
Background Color
Menu Settings
Input Source

S-Video

English

SIM2

Auto Source Search

EXIT Back

Disable

Disable

Blue

On

Floor Front

System

Display

Setup

Advertising