Sim2 Multimedia DIGITAL D60 - Manual (Page 33)

33 Using the projector
Disabled functions for the active windows
The following OSD menu functions cannot work on the active windows for the PIP: My Screen,
Auto Source Search.
Creating your own startup screen
In addition to selecting the projector preset startup screen from among SIM2 or Blue screen,
you can make your own startup screen that is a picture projected from your computer or
video source.
To create your own startup screen, project the picture you want to use as your startup screen
from either a computer or video source. The rest steps are as follows.
• Using the OSD menu
1. Press MENU and then press / until the System menu is
highlighted.
2. Press to highlight My Screen and press ENTER. A
confirmation message displays.
3. Press ENTER again.
4. The message 'Screen Capturing...' displays while the
projector is processing the picture. Please wait.
5. If the action is successful, you see the message 'Captured
Succeeded' on the screen. The captured picture is saved as
My Screen.
6. To view the captured picture displayed as the startup screen, set My Screen in the
System > Splash Screen menu and restart the projector.
In the unlikely event that the capturing action fails, change your target picture.
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The following
settings do not affect the projection settings, operation, or performance.
•
Rename User Mode: See "Renaming user modes" on page 24 for details.
• Menu Display Time in the System > Menu Settings menu sets the length of time the OSD
will remain active after your last key press. The time length ranges from 5 to 30 seconds in
5-second increments. Use / to select a suitable time.
• Menu Position in the System > Menu Settings menu sets the OSD position in five locations.
Use / to select a preferred position.
• Language in the System menu sets your familiar language for the On-Screen (OSD)
Menus. See
"Using the menus" on page 19 for details.
• Splash Screen in the System menu sets a preferred screen to be displayed during
projector start-up. See "Creating your own startup screen" on page 33 for details.
Language
Splash Screen
My Screen
Projector Position
Auto Off
Sleep Timer
Background Color
Menu Settings
Input Source
S-Video
English
My Screen
Auto Source Search
EXIT Back
Disable
Disable
Blue
On
Floor Front
ENTER
System Display Setup