Sanyo PJLINK PDG-DXL100 - Manual (Page 18)

English
17
English
Installation
Warning Indicator
 When the “TEMP” LED i ndicator turns red , it indicates the
projector has overheated. The projector will auto matically
shut itself down.
 When you see the message below displays on-screen, the
projector has detected that the lamp is approaching its end
of life. Please change the lamp as soon as possible or contact
your local dealer or our service center.
 When the “TEMP” LED indi cator flashes red and the mes-
sage below displays on-screen, it indicates the fan failed.
Stop using the projector and disconnect the po wer cable
from the electrical outlet, then contact your local dealer or
our service center.