Sanyo PJLINK PDG-DXL100 - Manual (Page 61)

60
English
Appendices
4. Type the commands, refer to right
table, to control the projector and
then press “Enter” key for termina-
tion. For example, type “C00” which
is a command to turn on the projec-
tor, and press “Enter” key. Confirm
the projector is turning on.
To disconnect the communication,
press “Ctrl” key and “]” key at the
same time, type “close” and then press
“Enter” key on the Keyboard.
> close [return]
The table right shows the typical com-
mand lists for controlling this projector
and please consult your local dealer for
further information of another com-
mands.
Enter with ASCII
64-byte capital char-
acters and one-byte
characters.
Note
Command list table
Command Function
C00 POWER ON
C01
POWER OFF
(Immediate POWER OFF)
C09 Volume +
C0A Volume -
C0B SOUND MUTE ON
C0C SOUND MUTE OFF
C0F Aspect 4:3
C10 Aspect 16:9
C1C MENU ON
C1D MENU OFF
PJLink Notice
This projector is compliant with PJLink Standard Class 1 of
JBMIA (Japan Business Machine and Information System
Industries Association). This projector supports all com-
mands defined by PJLink Class 1 and is verified conformance
with PJLink Standard Class 1.
Projector PJLink
Input Input Parameter
Computer 1 RGB 1 11
YPbPr 1 RGB 2 12
SCART RGB 3 13
Computer 2 RGB 4 14
YPbPr 2 RGB 5 15
Video VIDEO 1 21
S-Video VIDEO 2 22
HDMI DIGITAL 1 31
PJLink is a registered trademark of JBMIA and pending trademark in
some countries.