Sanyo PJLINK PDG-DXL100 - Manual (Page 59)

58
English
Appendices
Status Read Command
Format
The command is sent from PC to the projector with the format below;
‘CR’ [Command] ‘CR’
Command: one character (refer to the command table below.
■ The projector decodes the command and returns the ‘Character
string’ with the format below;
Command Function
Projector
Return
Projector status
CR0 Status Read
00 Power ON
80 Standby mode
20 Cooling Down
10 Power Failure
28
Cooling Down due to Abnormal Temperature
in process
21
Cooling Down in process after Off due to lamp
failure
81
Standby after Cooling Down due to lamp
failure
CR1 Input Mode Read
CR3 Lamp Time Read
CR4 Setting Read
CR6 Temperature Read S1
S1 = Temperature at Sensor 1 (˚C)
(ex.) S1 = 12.3˚C
--> The projector displays “12.3
CR7 Lamp Mode Read
The tables on pages
56~58 show the typical
command lists for con-
trolling the projector.
Please consult your
local dealer for further
information of other
commands.
Note