Sanyo PJLINK PDG-DXL100 - Manual (Page 25)

24
English
User Controls
Tint
Adjust the color balance of red and green.
 Press the to increase the amount of green in the image.
 Press the to increase the amount of red in the image.
Sharpness
Adjust the sharpness of the image.
 Press the to decrease the sharpness.
 Press the to increase the sharpness.
White Peaking
Use the white peaking control to set the white peaking level of
DMD chip. 0 stands for minimal peaking, and 10 stands for maxi-
mum peaking. If you prefer a stronger image, adjust towards the
maximum setting. For a smooth and more natural image, adjust
towards the minimum setting.
Color Temp.
Adjust the color temperature. At higher temperature, the screen
looks colder; at lower temperature, the screen looks warmer.
Gamma
This allows you to choose a gamma table that has been fine-tuned to
bring out the best image quality for the input.