Job build – Sharp AR-M700N User Manual
Use job build mode when you need to copy more original pages than can be loaded at once in the document feeder
(the maximum number of pages that can be loaded is 150). This function allows the original pages to be scanned in
[Example] Copying 300 pages of 8-1/2" x 11" originals
Touch the [JOB BUILD] key on the special
The [JOB BUILD] key
will be highlighted to
indicate that the function
is turned on, and the job
build icon (
appear in the upper left
of the screen.
Touch the [OK] key on the special modes
Return to the main
screen of copy mode.
Place the first set of originals in the
document feeder tray. (page 4-3)
Make sure that the desired paper size is
selected, select the number of copies or
other copy settings, and press the
Scanning of originals will
start. After scanning of
the first set of originals (A
in the example above) is
completed, remove the
scanned originals, place
the next set of originals
(set B in the example) and press the [START] key.
Repeat this operation until all sets of originals have
Touch the [READ-END] key.
Divide the originals into sets of 150 pages each.
Scan the originals starting from the first page of set
A. Scan set B next, taking care to keep the correct
300 original pages
To cancel the job build function, touch the [JOB
BUILD] key on the special modes screen (step 1).
The highlighted display will be canceled.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].