Xy zoom – Sharp AR-M700N User Manual
The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed separately. The ratios can set
from 25% to 400% in increments of 1%.
Example: Selecting 100% for the length and 50% for the width
Touch the [COPY RATIO] key.
Touch the [XY ZOOM] key.
Touch the [X] key.
The initial state of the [X]
key is selected
(highlighted), so this
step normally is not
necessary. Touch the
[X] key only if it is not
Use the reduction, enlargement, and
]) keys to change the
copy ratio in the horizontal (X) direction.
A fixed ratio key will not
Zoom ratios: Any ratio
from 25% to 400% can
be set in 1% increments.
Touch the [
] key to
increase the ratio, or the
] key to decrease
the ratio. (If you continue
to touch the [
] key, the ratio will change
automatically. After 3 seconds, the ratio will
Touch the [Y] key.
When the original is placed in the document feeder,
the ratio can be set from 25% to 200%.
● Touch a reduction or enlargement key to set the
approximate ratio, then touch the [
] key to
increase the ratio or the [
] key to decrease the
● Automatic changing of the ratio when a zoom key
is continuously touched can be disabled in the key
operator programs (see "Key operation setting
(prohibit key repeat)” on page 10 of the key