Spirit Communications System ConnecT/R - Manual (Page 12)

8
Step 2 — If the telephone device has touch
tone dialing, set ADMIN for call restrictions.
Both rotary and touch tone devices can be
restricted from making certain kinds of calls.
The difference is that rotary devices are re-
stricted at the port (along with the attached
SPIRIT Telephone, according to the way the
port was customized) and touch-tone devices
are restricted by setting ADMIN on the back of
the ConnecT/R.
This step is required if the telephone device is
touch tone only or has been set to touch tone. If
the telephone device can be set to either touch
tone or rotary, we recommend this step so that if
the telephone is ever set to touch tone, its calls
will be restricted in the way you want. You can
change the ADMIN setting any time your needs
change.
NOTES:
● If you have more than one telephone
device attached to the ConnecT/R this
setting applies only to those set as touch
tone, and applies to them equally.
●
●
●
●
If you have a SPIRIT Telephone or
rotary dial telephone attached, their toll
restrictions will not be affected by the
ADMIN setting.
The ADMIN setting you choose doesn't
have to match the call restrictions set
for the SPIRIT Telephone.
If you have to dial a single digit (usually
a 9) before dialing an outside number,
and you DO NOT have to dial a 0 or 1
before dialing a toll call, the telephone
device cannot be toll-restricted.
Regardless of how you set the ADMIN
switch, the emergency number 911 is
always available.