Spirit Communications System ConnecT/R - Manual (Page 15)

4-Wire Cords
STATION
JACK
Sample Answer/
Record Machine
3.
11
CTRLR jack on the back of the ConnecT/R
and connect the other end into the controller.
You can do this either by plugging it into the
STATION jack on the controller or by plug-
ging it into a modular wall jack connected
via a wiring run to the STATION jack on the
controller.
SPIRIT Controller
ConnecT/R
4-Wire Cords
Directly connected by a cord
from one unit to the other, or
connected via a wiring run.
Connect the SPIRIT Telephone to the
ConnecT/R (optional). Plug one end of a 4-
wire cord into the jack on the underside of
the SPIRIT Telephone and connect the other
end into the SPIRIT SET jack on the back of
the ConnecT/R. You can do this either by
plugging it into the SPIRIT SET jack on the
back of the ConnecT/R or by plugging it
into a wall jack that is connected to the
SPIRIT SET jack on the ConnecT/R.
ConnecT/R
4.
SPIRIT Telephone
Connect the telephone device to the
ConnecT/R. Using the line cord provided
with the telephone device, plug one end into
the LINE jack (or its equivalent) on the back
of the telephone device and connect the
other end to the TEL DEVICE jack on the
ConnecT/R