Spirit Communications System ConnecT/R - Manual (Page 9)

AC
Power Telephone Device: Fax, Modem, Answer/Record
Outlet Machine, Telephone, etc.
Controller
4-Wire Cords
Directly connected by a cord
from one unit to the other, or
connected via a wiring run.
5
STATION
JACK
ConnectT/R
Figure 4. SPIRIT ConnecT/R without Attached SPIRIT Telephone
Step 1 — If you attach a SPIRIT Telephone
and a telephone device, set MODE for call
access priority.
NOTES:
●
●
If you attach more than one telephone
device to the ConnecT/R, this setting
applies to them equally.
If you don't have a SPIRIT Telephone
attached, the MODE setting has no
effect.
With the ConnecT/R, a SPIRIT Telephone and a
telephone device share a single connection to
the controller. Therefore, you need to establish
which will have priority in any given situation.
You do this by setting MODE on the back of the
ConnecT/R. The examples in the table on the
next page and the descriptions that follow will
help you decide which setting is appropriate for
your needs. The table is not an exhaustive list;
your own business needs will determine how
you set the mode. You can change the MODE
setting any time your needs change.