Spirit Communications System ConnecT/R - Manual (Page 8)

4
Installation
A complete ConnecT/R has the components
shown in Figures 3 and 4. You could have two
telephone devices attached and you do not have
to have a SPIRIT Telephone attached.
INSTALLATION INSTRUCTIONS
1. Never install telephone wiring during a
lightning storm.
2. Never install telephone jacks in wet loca-
Controller
ConnecT/R
STATION
JACK
3.
4.
AC
tions unless the jack is specifically designed
for wet locations.
Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
Use caution when installing or modifying
telephone lines.
Power Telephone Device: Fax, Modem, Answer/Record
Outlet Machine, Telephone, etc.
4-Wire Cords SPIRIT Telephone
Directly connected by a cord from one unit to the
other, or connected via a wiring run.
Figure 3. SPIRIT ConnecT/R with Attached SPIRIT Telephone and Telephone Device