Important safety instructions – Spirit Communications System ConnecT/R User Manual

Page 3

Advertising
background image

IMPORTANT SAFETY INSTRUCTIONS

To reduce risk of injury from fire or electric
shock, always follow basic safety precautions
when using this product. The safety symbol
(exclamation point inside a triangle) on the
ConnecT/R alerts you to the important operat-
ing and maintenance instructions below.

1.

2.

3.

4.

Read and understand all instructions in this
Owner's Manual.

Observe all warnings and instructions
marked on the product.

Unplug this product from wall outlets and
telephone jacks before cleaning.
Clean
exposed parts with a soft, damp cloth. Do
not use liquid or aerosol cleaners, and never
immerse in water.

Do not use the product near water or when
you are wet.
For example, do not use it in a
wet basement or near a swimming pool,
bathtub, shower, sink, or laundry tub. If the
product comes in contact with any liquids,
unplug the power and line cords immedi-
ately. Do not plug the product back in until
it has been dried thoroughly.

5.

6.

7.

8.

9.

Install this product securely on a stable
surface.
Damage may result if the product
falls.

Install this product in a protected location
where no one can step on or trip over power
and line cords. Do not place objects on the
cords that may cause damage or abrasion.

Do not allow anything to rest on the power
cord.
Do not locate this product where the
cord will be abused by persons walking on
it. Do not overload wall outlets, as this can
result in the risk of fire or electric shock.

Never push objects of any kind into this
product through housing openings
because
they may touch dangerous voltage points or
short out parts, resulting in possible fire or
electric shock.

If this product does not operate normally,
see the Troubleshooting section of this
manual. If you cannot resolve the problem,
or if the product is damaged, Call the AT&T
Helpline at 1-800-628-2888. Do not open the

Advertising