Security Systems 808 User Manual
Page 21
496336 Issue 1
21 of 22
The Supervisor can give users 02 to 08 one or more of the following access
rights:
•
Enter a Duress code.
•
Either Full use (set and unset the Levels they are linked to) or Arm
only (set but not unset a Level).
•
Omit Zones.
•
Read the system log.
•
Print from the system log.
•
Change Zone names.
•
Reset Levels.
•
Change Time and Date.
The supervisor can give any ordinary user the access rights listed above. An
ordinary user cannot change the access rights of any other user.
Operating the System
Users can set and unset the system from a keypad by one of the following
methods:
[Access Code]+ [Enter Key]
The system sets or unsets Level A.
Or
[Access Code] + [Level Key]
The system sets or unsets the Areas as-
signed to the Level key used.
Users can reprogram limited parts of the system. The 808 provides the
following set of user menus:
Menu 2:
Omit 24 hour zones.
Menu 3:
System Options, Enable/Disable Chime.
Menu 4:
Test Options, including Walk Test and Bell Test.
Menu 6:
Set time and date.
Menu 7:
Change zone names.
Menu 8:
Change User Information (for example access
codes and authority levels). This Menu is available
to User 1 only.
Menu 9:
Log Functions, including View Event Log and Print
Event Log.
808
Operating the System