Security Systems 808 - Manual (Page 22)

22 of 22 496336 Issue 1
To gain access to these menus from a keypad the user must key in:
[Access Code] + [Menu key] + [Menu Number]
For more information on using the 808 see "808 User Guide".
Installer Setting
When you leave Programming Mode the system will allow you to enter the
Installer access code and use menus 4, 6, 7 and 9. In addition, you can also
set and unset the system by entering [0] + [Installer access code] + [Enter] or
[0] + [Installer access code] + [Level key].
The remote keypads display the message "System being configured" when a
Level has been set using the Installer access code. Note that you cannot use
the Installer access code to unset the system when a user has set the
system with a user access code.
Installer Setting 808