Kathrein UFD 420 - Manual (Page 16)

Receiver operation
16
Programme sorting (inserting), swapping and copying
With the function: “Programme sorting (inserting), swapping and copying“ you can
adapt the programme order in TV- and radio mode to suit your individual require-
ments.
Example
You want to put the programme from programme slot “P083" into programme slot
“P003" (insert).
•
Press the + keys in succession.
The menu for function “INSERT” programme slot appears.
Options:
Insert programme slot (sort)
Swap programme slot
Copy programme slot
The cursor flashes at the currently selected programme.
•
Select programme slot P083 using the ... keys or the keys.
•
Move to the right-hand side with the cursor by pressing the key: .
•
Select programme slot P003 using the ... keys or keys.
•
Press the key twice.
The programme from programme slot 83 is now transferred to programme slot 3
(inserted). The following message appears on the screen:
Please wait
When transfer completed, following message appears:
Programme inserted!
The other programme slots are shifted accordingly as a result.
Further programmes can be moved using the same method..
•
To switch into the “SWAP" and “COPY“ modes press the key once more and
twice more respectively.
•
Exit from the menu with the key.
Radio programmes can be inserted, swapped or copied using the same method in
“radio” mode.
Operation without remote control
When the satellite receiver is switched on, it always returns to the last mode that it
was in prior to being switched off.
If the unit was switched off via its mains switch whilst in Standby mode, on
switching on again it returns to Standby mode.
If you happen to have mislaid the remote control handset, you can switch the re-
ceiver on by simultaneously pressing both
keys on the front of the unit. By
further pressing you can switch between “TV“ and “Radio“ and between “TV“-
(tuner A) and “VCR“ (tuner B) operation.