Kathrein UFD 420 - Manual (Page 17)

Receiver operation
17
Functional sequence:
Press keys VCR display TV display
P 010 P.003
P.010 P 003
P 010 r.001
P.010 r 001
r 005 r.001
r.005 r 001 etc.
Displaying programme overview
The unit is in normal mode (TV or radio mode).
•
Press the key.
The programme overview appears on the screen.
The currently selected programme is identified by <..> .
•
The keys can be used to single-step through the programme list while the
keys allow paging in steps of 10.
•
Pressing the key once results in switchover to the marked programme. On
exiting the programme overview with key, there is a switch back to the pre-
vious programme.
•
Pressing the key twice results in switchover to the marked programme and
exit from the programme overview.
•
To exit from the menu without selecting a programme press key
.
Info menu
•
Press the key whilst the programme list is overlaid.
The Info menu appears with instructions for calling up the setup menus for the ini-
tial setup, video and audio setup and radio settings.
Exit from the menu with keys , or .
Stop-watch
By pressing the key you can start a stop-watch. A further pressing of the key
removes the stop-watch from the display again.
The unit is in normal mode (TV or radio mode).