Kathrein UFD 420 - Manual (Page 31)

Features
31
The UFD 420 receiver is equipped with the following features:
•
2 tuners for simultaneous operation of the TV set and video recorder with differ-
ent programmes
•
250 programme channel memory
•
Satellite input frequency range from 920 MHz to 2150 MHz
•
Freely selectable oscillator frequencies - therefore suitable for all feed systems
•
Radio button
•
4 event, 1-year programmable timer, with daily and
weekly repeated switch-on
•
Mains switch with mains isolation
•
Power failure protection for date and time by lithium battery
•
Stereo / Dual tone switchover
•
On-screen display (OSD) 3 languages (German, English and French)
•
22 kHz control signal, programmable
•
DiSEqC 1.1 and tone-burst control signal
•
LNB supply voltage can be turned off
•
Connecting socket for data copying function
(read-in and read-out of programme data with the “Copy Programmer“)
•
Connector available for URS 200 external infrared sensor
•
Sort- (insert), swap- and copy function for programme slot
•
Audio frequency range 5.0 MHz to 8.8 MHz
•
Sound muting
•
Volume control and also controls for balance, tone and stereo width
•
Dynamic noise reduction (DNR) – Wegener Panda
•
3 Scart sockets for TV-, VCR- and decoder connection
•
PLL modulator
•
Additional audio outputs via Cinch sockets
•
Standby power consumption
≤
2 watts
•
Last-status memory