Kathrein UFD 420 - Manual (Page 32)

Specifications
32
Technische Daten
UHF characteristics
Sat IF frequency range 2 x 920 to 2150 MHz
Input level range 48 to 78 dBµV
IF frequency 479.5 MHz
IF bandwidth 27 MHz
FM threshold 7 dB max.
Video
Frequency range 20 Hz to 5 MHz
Output voltage 1 Vss / 75
Ω
Video deviation 16 / 25 MHz
De-emphasis CCIR Rec. 405 / 625 lines
S/N 54 dB typ.
Audio
Subcarrier frequency range
Bandwidth
5.0 to 8.98 MHz
- Mono wide 280 kHz
- Mono narrow / Stereo 150 kHz
Frequency range 40 Hz to 15 kHz
De-emphasis dnr 75 µs / 50 µs / J17
Output voltage
- TV Scart socket + Cinch sockets
- VCR Scart socket
1 Veff / into 10 k
Ω
0.77 Veff / an 10 k
Ω
Distortion factor <1.0 % (at 1 kHz)
S/N >70 dB
Modulator
Standard CCIR PAL G
Output channel PLL tuning
settable from channel 21 - 69
(presetting channel 38)
UHF output level 71 dBµV ± 6 dBµV
Power supply
Mains voltage 230 V +10%, -15%, 50 Hz
Power consumption 21 W
Power consumption in standby 2 W
LNB supply voltage 0, +14 V (vert.), +18 V (hor.)
LNB supply current 1 * 400 mA max.; 2 * 250 mA max.
Control signal 22 kHz 0.6 Vss square-wave
DiSEqC 1.1; Tone burst
Connectors
Sat IF input 2 * F sockets 75
Ω
Modulator
- Input IEC socket 75
Ω
- Output IEC plug 75
Ω
TV connection Scart/Peritel socket, 21-way
VCR connection Scart/Peritel socket, 21- way
DECODER connection Scart/Peritel socket, 21- way
Audio output Cinch sockets
Data interface Western, 8-way