Kathrein UFD 545 - Manual (Page 21)

Timer Settings
21
You can use the timer for recording a programme with a video recorder on time.
Seven timers are available which you can set to different channels as well as start
and end times.
To access the timer setting, press
M
to enter the main channel menu,
uo
to go to system parameters, followed by
O
and
uo
to local time / timer
and
O
. You now see the display shown below.
Press the
ou
buttons to move the
cursor to the timer you require and confirm
it by pressing
O
. Press
L
to exit the
timer again.
Incorrect time settings will be rejected.
You can select and set
•
the channel type, TV or radio,
•
the channel location number with channel name,
•
the start time (date, month, year, hour, minute)
•
the stop time and
•
the timer status (inactive/once/daily/weekly)
for seven timers. You must enter leading zeros for the time settings.
Use the
-+
and the number buttons to make the required setting.
The current time that you must re-enter appears under the start time. If no other
setting is entered, the end time will be set automatically to the same date and one
hour after the start time.
Finally confirm the settings by pressing
M
or
L
three times.