Kathrein UFD 545 - Manual (Page 40)

Installation Menu
40
All new channels are added to the existing channel list.
Under the menu item "Delete TP" you can remove the transponder from the
channel memory by pressing
O
. You will be requested to confirm that you wish to
remove the transponder before it is deleted.
Analogue transponder
In order to set a new analogue channel, you must first select the "analogue"
submenu by pressing
-+
and confirm your selection with
O
.
Bear in mind that the outdoor unit must
be correspondingly set up for a new
satellite (see section "LNB
configuration").
The frequencies and polarization are
listed in SAT 1 video text, on the internet,
in the corresponding TV and satellite
magazines or our leaflet "Satellite
channels and footprints". For cable
connections, observe the information
provided by the operator.
Now press the
-+
button to select the
required satellite and, using the number
buttons, enter the channel name (see
section "Notes on operation").
Move the cursor bar by pressing the
ou
button to select all menu
items.
Use the number buttons to make the
relevant entries or change the entries
with the
-+
button. Dynamic noise
reduction DNR is normally activated.
Press
M
twice to exit the menu and the new channel will be added automatically
to the end of the channel list. You will then see the message:
Changes being saved
Please wait