Kathrein UFD 545 - Manual (Page 33)

Setting System Parameters
33
Systemparameter einstellen
You should not change the following settings without good reason as they
represent factory settings or operational settings that are adapted to your receiving
system.
New settings are only required when changes are made to the reception system.
The selected menus, submenus and menu points as well as the parameters to be
set are highlighted by a colour bar. The menus are to a large extent self-
explanatory. Information relating to the respective menu point is provided in the box
displayed under the menu.
The main menu consists of the following submenus:
•
Channel lists
•
System parameters
•
Installation and
•
Menu language
System parameters
Select the "system parameters" menu by pressing the menu button
M
, the
ou
button in the main menu and
O
. Press the
ou
buttons to select
the menu points.
Parental control
The basic settings that can be implemented here are described in the section
"Password" under "Setting parental control".
System information
Under the menu point "System
information" you will find factory settings
which cannot be changed and are
intended for service purposes only. Press
O
or
L
to return to the "system
parameters" submenu.
Local time/timer
As the factory setting, the receiver indicates "UTC" (United Time Coordinate,
formerly Greenwich Meantime) that is transmitted together with the data stream.
It may be necessary to correct summer time to ensure the timers switch at the
correct times.
You can correct the time yourself with the aid of the number buttons.
For this purpose, move the cursor bar with the
u
button to the menu point "local
time/timer". The first digit in the entered time assumes a black background. You
can now correct the date and time setting with the number buttons. After each
entry, the cursor moves forward by one position. Press M twice to end the entry.
The receiver saves the new setting.
After this setting, do not switch off the receiver with the power switch but rather first
with the remote control otherwise the settings will be lost.