Klegg electronic M6 501P - Manual (Page 14)

13
In the following pages we have provided detailed operation explanations to guide you through
the proper setup and operation of the M6 501P. As you might have noticed, there is only a
POWER ON/OFF button on the front panel. The M6 501P has been purposely designed for
user-friendly remote control operation. All functions and settings of the M6 501P are operated
from the remote control.
M6 501P Operation – LCD and LEDs
1. Press the power button to turn the M6 501P on, press it again to turn it off.
2. When power is turned off using the power button the M6 501P will do the following:
a. Both LCD display and Speaker Configuration LEDs will switch off.
b. Power indicator LED will remain on.
c. Decoder status and user configurations will be memorized.
d. Once the power is turned on again the M6 501P will resume to its previous decoder
status and user configurations.
3. When power is turn off from the mains supply the M6 501P will do the following:
a. LCD display, Power Indicator LED and Speaker Configuration LEDs will switch off.
b. Decoder status and user configurations will be lost.
c. The M6 501P will reset to factory default settings at resumption of power supply.
M6 501P Operation