Klegg electronic M6 501P - Manual (Page 6)

5
M6 501P Features
- DTS
- Dolby Digital
- Dolby Pro Logic
- Bass Management
- Sound Field Processing
- Equalization
Important Safety Instructions
To ensure your safety, please read these instructions before operating this unit.
1. Note all instructions and warnings marked on the unit.
2. Always use the correct line voltage. Please refer to page 6 and locate the correct power
requirement for your area. Please note that different operating voltages may require the
use of different adapters.
3. Do not install the unit in an unventilated rack or directly above heat producing
equipment such as power amplifiers.
4. Do not block the openings on either side of the case.
5. To avoid shock or fire hazard, do not expose the unit to rain or moisture or operate it
where it will be exposed to water.
6. Do not attempt to operate the unit if it has been dropped, damaged, exposed to liquids,
or if it exhibits a distinct change in performance indicating the need for inspection.
7. Only qualified service personnel should open this unit.
8. Removing covers will expose you to hazardous voltages.
9. Do not overload wall outlets or extension cords as this can result in a risk of fire or
electrical shock.
10. Route power supply cords so that they are not likely to be trodden on or pinched by
items placed on or against them, paying particular attention to plug fittings at the wall
outlets and at the point at which they exit from the unit.