Klegg electronic M6 501P - Manual (Page 8)

7
M6 501P Front Panel
1. The POWER Button
This button turns M6 501P ON or OFF.
2. The POWER Indicator
This LED lights up when you plug in DC-12V.
3. Speaker Configuration LEDs
Each LED represents the status of an individual channel. When a particular channel is
active, the LED lights up. A RED LED light means this particular channel has been set
to output a wide frequency range that contains bass signals between 20Hz to 120Hz. A
GREEN LED light means this particular channel does not contain the bass signal
between 20Hz to 120Hz. When connecting to the Klegg M6 501R Home Theatre
Speaker System the Subwoofer channel should be the only RED LED. All other
channels should be set to narrow frequency bandwidth and should display GREEN (see
page 23).
4. Front Panel Display
This display provides you with important information regarding system status and
settings. It is important to be familiar with all the indicators on the display in order to
ensure correct operation of the system.