Klegg electronic M6 501P - Manual (Page 25)

24
By pressing the SW Button the subwoofer will be switched on/off and the LCD will display the
following information:
D o l b y D i g i t a I C o
S P K S W O N
D o l b y D i g i t a I C o
S P K S W O F F
Bass Manager
By pressing the BASS MANAGER Button you can choose from three different settings of: Bass
Config.1, Bass Config.2 and Bass Config.3. These selections will feed bass signals below
120Hz to the appropriate speakers.
Bass Config. 1
With this setting bass signals below 120Hz will be sent to subwoofer. The LED on the front
panel of the M6 501P indicating SW will be in red and the LCD will show the following
information:
D o l b y D i g i t a I C o
B A S S C O N F I G . 1
Bass Config. 2
With this setting bass signals below 120Hz will be sent to front left speaker, front right speaker
and subwoofer. The LEDs on the front panel of M6 501P indicating L/R/SW will be in red, and
LCD will show the following information:
D O l b y D i g i t a I C O
B A S S C O N F I G . 2
Bass Config. 3
With this setting bass signals below 120Hz will be sent to all speakers. The LEDs on the front
panel of M6 501P indicating L/R/SL/SR/SW channels will be in red.
D o l b y D i g i t a I C o
B A S S C O N F I G . 3
Bass Config. Off
With this setting bass signals below 120Hz will be sent to all speakers. The LEDs on the front
panel of the M6 501P indicating L/R/C/SL/SR/SW channels will all be in red.
D o l b y D i g i t a I C o
B A S S C O N F I G . O F F