Konica Minolta Magicolor 5440 DL - Manual (Page 122)

Main Unit Field Service Menu (magicolor 5430 DL /5440 DL)
3-19
III
Ad
just
men
t/Set
ting
4.6 CONSUMABLE USAGE
NOTE
• When the toner remaining in the cartridge is between 88% and 100%, the display
shows “100%,” regardless of the actual amount. The amount of toner supplied to
the toner cartridge may vary slightly. Also, some toner is consumed when check-
ing the screen during manufacture.
• When the amount of toner is 87% or less, the display shows the exact amount of
toner.
4.6.1 BLACK TONER
4.6.2 CYAN TONER
4.6.3 MAGENTA TONER
4.6.4 YELLOW TONER
4.7 DIRECT PRINT
NOTE
• Available only when an optional Camera Direct Photo Print Card is installed on the
magicolor 5440 DL.
4.7.1 IMAGE QUALITY
Function • Displays the remaining life of the Toner Cartridge (K) as a percentage.
Use • To check the remaining life of the Toner Cartridge (K).
Function • Displays the remaining life of the Toner Cartridge (C) as a percentage.
Use • To check the remaining life of the Toner Cartridge (C).
Function • Displays the remaining life of the Toner Cartridge (M) as a percentage.
Use • To check the remaining life of the Toner Cartridge (M).
Function • Displays the remaining life of the Toner Cartridge (Y) as a percentage.
Use • To check the remaining life of the Toner Cartridge (Y).
Function • Sets the output resolution for Camera Direct Photo Printing.
Use • To change the output resolution Camera Direct Photo Printing.
Setting
/procedure • The output resolution for each setting is as follows:
- DRAFT: 600 dpi
- NORMAL: 1,200 dpi x 600 dpi
- FINE: 2,400 dpi x 600 dpi
NOTE
• When using Normal mode/Fine mode, an addition 128 MB of memory needs to
be installed. Only Draft mode is available with the printer’s base memory.
The default setting is “DRAFT.”
DRAFT NORMAL FINE
5450_E.book_PDF.book 19 ページ ２００５年４月１２日 火曜日 午後１２時５４分